Volumetric modular housing · Philippines & Europe

Two halves.
One home.

A2 Modulare builds studio homes as two factory-finished half-modules. Each half is a 20ft high-cube container, so a pair ships as one 40ft slot. On site, they're craned in and joined down the centreline.

2 × 20′ HC → 1 studio
29.5 m²gross studio (26.4 m² net)
2,400 mmclear ceiling height
1 × 40′shipping slot per studio
PH + EUNBCP / NSCP and Eurocode basis
The split-module system

Built in the factory. Joined on site.

A 4.9 × 6.1 m studio is too wide to ship whole. So we split it down the middle. Each half travels as a standard container and the two lock together on site.

Factory fit-out

Each half-module leaves the factory finished: kitchen, bathroom, joinery, wiring and finishes. Only a narrow seam strip is left open, 380 mm in the floor and 300 mm in the ceiling.

Ship as containers

Every half is its own 2,438 × 6,058 × 2,896 mm ISO high-cube. Standard twistlocks, spreaders, trailers and port handling. No special transport.

Crane, join, seal

Set on cast-in locating cones, aligned to ±5 mm, bridge-clamped and bolted across the seam. Then the seam strip is sealed, services plugged in and the floor closed with matching oak boards.

Interior · 3D walkthrough

Step inside the Japandi studio.

Warm oak, washi light and a calm, compact plan. Orbit the room, switch views and browse the fixtures and finishes that come fitted from the factory.

Japandi studio walkthroughOpen full screen ↗
Site sequence · animation

From trailer to finished building.

Watch a pair of half-modules arrive on one trailer, get lifted onto their cones, joined at the seam and stacked floor by floor, all the way to the rainscreen façade.

Module installation sequenceOpen full screen ↗

No wheels, no special kit

Every module is lifted straight into place by crane. Fine positioning uses cones, tag lines and jacks, so there's no added weight or cost in every unit.

Container logistics, end to end

Reach stackers in the yard, a standard spreader on site, and one 40ft trailer per studio. It's the global shipping system, put to work for housing.

Mobile crane to tower crane

About 8.5 t on the hook per half-module. Mobile cranes cover up to 4–5 storeys; a flat-top tower crane takes it to 10–15.

Designed for two markets

One module, two code bases: Philippine NBCP, NSCP and RA 9514, and European EN and Eurocodes, at 230 V.

Concept drawing set

See every sheet, schedule and number.

The full split-module studio design set lives on its own site. It has the plans, an interactive layout editor, schedules, installation method and a live financial model.

  • L-001Interactive layout editor
  • M-001Installation method
  • F-001BOM, ROI & market model
  • X-001Module, façade & MEP schedules
  • V-0013D walkthrough
  • X-002Design basis & open items
Split-Module Studio · Rev P2designs.a2modular.com ↗
Work with us

Planning dormitories, staff housing or build-to-rent?

Tell us about your site and unit count. We'll come back with a module layout, a delivery sequence and a cost per studio.